When Your Product has Pressing Needs
There are times when your stamp needs a little extra force. This is where an Arbor Press or Percussion Press come in. They not only add up to 6 tons of force, they are great for repetive use. With its slotted grooves you can can create a setup, ensuring the same results every time. The ideal solution to larger scale demand and repetitive use..
 2 Ton Arbor Press $205.00 |  3 Ton Arbor Press $265.00 |  0.6 Ton Stamping Machine (Impact Press) $1624.00 |
3 Ton Stamping Machine (Impact Press) $2199.00 | 6 Ton Stamping Machine (Impact Press) $5439.00 |
These Presses are made of heavy-duty cast iron and are available in two sizes: one exerting 2 tons and the other 3 tons of pressure. The 2-ton press is suitable for use with Impression Stamps marking images up to approximately 2” square. The 3-ton press is suitable for images larger than 2” square.
Both the 2-ton and 3-ton Presses are made with a ratchet mechanism. This allows for comfortable positioning of the lever for the final application of force. The base plate is flat and level to ensure an even and uniform impression in the leather. These presses can also be used for other soft materials. They are good tools for creating clear and lasting impressions in the items being marked.
 |
Available in two sizes ( 1300 lbs. and 6600 lbs. ) |
Hand Operated Percussion Presses
Easy and safe to operate, these hand operated percussion presses can be used anywhere in the factory or home workshop. Marking is achieved by compressing and releasing a spring loaded ram; spring compression (and therefore marking load) can be easily and quickly adjusted.
Custom made Steel Stamps, Type & Number dies can all be attached to this impact press, making it a versatile and all around efficent marking tool.
Available in both 1300 lbs. (600kg) and 6600 lbs (3000kg) variable marking load sizes.
The TagMate
The TagMate is a compact auxiliary-marking device developed by Infinity Stamps specifically for marking Jewelry Tags of all shapes and sizes.
This marking device is easy to use and is simpler and more efficient than any marking tool ISI has tested in the past.
The TagMate is comprised of two parts: The base and the cap. TagMate Stamps are ordered separately. |
Features: The base is 1-1/4” in diameter by 1-1/2” high and the cap is 1-1/2” in diameter by 1-1/2” high. A recess ("bed") is engraved on the horizontal surface of the base and, when desired, a second recess of another shape and size can be engraved on its other horizontal surface. The recess is custom engraved to snugly hold any Jewelry Tag placed in it for marking.
The cap features an opening designed to allow the insertion of the TagMate Stamp, specifically designed and produced to fit only one way. After the TagMate stamp is inserted it has no wiggle-room and lands directly onto the center of the tag.
This marking method ensures accurate alignment of the stamp with the tag, leaving perfectly centered marks as large as can be.
Snapshots:
See More Photos
Looking for a larger or darker impression? Consider Branding.
Branding Irons Unlimited has the equipment you need to make it happen.
